AlignRC T-Rex600E PRO Super Combo - V2
- 3rd Generation T-Rex600E(Flybar Type) Pro Super Combo -
<구 성>
1. 필드에서 호평 받은 New MX600 모터의 High Voltage 버젼!
Li-Poly 기준 최대 48V(12 Cell)까지 지원!(510KV)
2. 더 이상 설명이 필요없는 - Brushless ESC의 명가!
Castle ICE -HV 타입 브러시리스 변속기 기본 사양!
3. 완전히 새롭게 설계된 Full Programmable 방식의 플라이바 헤드.
벨/힐러 비율을 최대 3단계로 조절이 가능하며 사용자의 취향에 따라 Pattern 또는 극악 3D에 적합하도록 벨/힐러 비율을 변경 할 수 있습니다.
4. 역시 T-Rex700과 동일한 슬라이딩 배터리 트레이 마운팅 방식을 채용, 필드에서 보다 간편하게 배터리 교체 가능.
5. T-Rex500E/700E에서 호평 받은 헬리컬 방식 메인기어 시스템.
6. T-Rex700E에서 별매 옵션이 었던 Metal Elevator Servo Mount가 기본 사양.
7. 보다 간편한 테일 메인터넌스를 위한 테일서보 후방 마운팅 방식(카본 엠베디드)을 채택.
8. 전자 장비(ESC 및 Regulator등) 수납을 위한 H-Cross 섹션 노즈 마운트.
9. 완전히 새롭게 디자인 된 카본 테일 컨트롤 로드 세트.
10. 550E/600/700 시리즈에서 완전히 검증된 고효율 테일 샤프트 드라이브 방식.
11. 테일 슬라이더 내구성을 위한 컨트롤 암 및 내 마모성 Composite 슬리브 장착!
12. 이제는 대형 전동헬기의 표준! DS610 X 3 Set + DS650 Tail Servo 기본 사양!
아울러 600급에 걸맞는 Metal Servo Horn은 이제 기본!
13. Gyro의 표준! GP780 Head Lock 자이로가 기본 사양!
14. 600mm 카본 로터 기본 사양.
<Demo 동영상>
Special Thanks to Alan Szabo!
- Specification
●Features
1.Brand new all metal high precision and high rigidity main blade assembly, providing 3 positive/negative deltas and numerous Bell & Hiller mixing ratios. The head can be tuned for superior stability suitable in F3C competition, or lightening fast agility for 3D aerobatic exhibition.
2.The frame utilizes 2mm carbon fiber plates of the highest spec. Patented composite material construction technique cleverly utilize frame space that improved overall rigidity, and also created a minimalistic beauty.
3.Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
4.Heatsink embedded into motor mount for effective cooling of motor.
5.Top mounted motor base bringing the motor’s center of gravity closer to rotating disc, improving 3D agility.
6.Utilize direct link CCPM swashplate control system to enable direct and fast control response. Specially designed anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
7.Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
8.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
9.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
10.Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
11.Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries
12.Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
13.Ergonomically designed H-shaped electronic mount to provide flexible organization or equipment, and minimize wire clutter.
14.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
15.Total pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
16.Tail pitch mechanism equipped with high precision bearing.
17.High speed thrust bearings in tail blade grips.
18.New lightened landing gear assembly with lower center of gravity.
19.High quality painted fiberglass canopy with 4-point quick release mounts.
- Specification(T-REX 600E PRO Super Combo) :
● Length: 1160mm
● Height: 353mm
● Width: 210mm
● Main Blade Length: 600mm
● Main Rotor Diameter: 1347mm
● Tail Rotor Diameter: 260mm
● Motor Drive Gear:13T
● Main Drive Gear:112T
● Autorotation Tail Drive Gear: 131T
● Tail Drive Gear: 34T
● Drive Gear Ratio: 1:8.61:3.85
● Weight(With Motor): 2350g
- Accessories:
●T-REX 600E PRO Kits Set X1
●Aluminum Tail Boom X1
●600D Carbon fiber blades X1
●600MX Brushless Motor(510KV) X1
●DS610 Digital servoX3
●DS650 Digital servo X1
●GP780 Head Lock Gyro X1
●Castle ICE HV 80 Brushless ESC X1
●6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
●105mm 3K Carbon Fiber Tail Blades X1 Set
Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 2600 ~ 5200mAh X2 (3300mAh suggestion)
●Dial Pitch Gauge