Align RC T-Rex450 Pro 3GX Super Combo(w/DS410M+DS520)
- 450 클래스 절대 강자 -
 
450 클래스의 새로운 별(Star) - T-Rex450 Pro 3GX Super Combo
더 이상 설명이 필요없는 - 10세대 T-Rex, 450 Pro는 Flybarless 전용으로 설계된 기체로서 현재 각광을 받고 있는 3GX 3축 자이로가 탑재된 450급 최강의 전동헬기 입니다.

 

Special Thanks to Kenny Ko!  

 

- 2세대 3축자이로로 각광받고 있는 신형 3GX 자이로 탑재!

 

- Max 700W의 극악파워! MX시리즈의 4세대 450 모터 - 450MX 모터 기본 장착

- Family Look! New 도장 완성형 캐노피

- Center Hub와 워시아웃 베이스 일체형 FLS 시스템.

- 고정밀 베어링 믹싱 암.

- 개선된 배터리 마운트 채용으로 보다 정확한 C.G Point Calibration.

- ALIGN 3GX, Beast X에 최적화 된 신형 자이로 마운트

- 새롭게 디자인된 메인프레임 시스템.

- 프레임 내부에 3GX Gyro 장착시 보다 정밀한 세팅을 위해 바텀 프레임 변경

- 센터 부근에 관성질량을 집중하기 위한 수직 러더 서보 마운트 디자인

- 원피스 랜딩기어

- 3GX에 최적화된 전용 3G 카본로터

- High Resolution, 저소비 전력으로 우수한 성능의 DS410M Cyclic Servo 3Set/DS520 Tail Servo 포함!

-  DS520 디지털 테일 서보 기본 포함.
- Field에서 검증된 탁월한 성능 - ALIGN RCE-BL35X 변속기 기본 포함!

 

주의 : 국내 정식으로 수입되는 ALIGN사의 모든 Motor, ESC, Servo, Gyro는 전수 검사 후 출하되며 파쇄형 홀로그램 스티커가 붙어서 출하됩니다.
홀로그램 스티커가 없는 경우 A/S가 되지 않거나 유상수리 처리되므로 이점 양지말씀 드립니다.
 

 

- Instruction(3GX)
●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
●3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
●Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
●Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
●Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
●With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
●A library of pre-configured 3GX settings specifically available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters.
●Three levels of flight mode is available on the 3GX to provide different feels from beginners to advanced pilots.
●Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
●3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
●Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
●3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
●With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
●3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
●Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
 
- Features(T-Rex450Pro V2)
●Incorporating the new generation 3GX flybarless system, with enhanced pirouetting compensating routine, and optimized stability for smaller helicopter. Together these features enable smaller helicopters to have control feel that resembles its flybar counterpart.
●Newly improved low wind resistance specialized flybarless rotor head assembly, with reduced distance between rotor head and frame, effectively lowering the CG for better 3D performance.
●Improved side frame design, with dedicated 3GX mounting location. 3GX can be placed in between frames, or behind anti-rotation guide, resulting in clean wire management and improved aesthetics.
●Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
●Brand new MX series high efficiency brushless motor, with heat sink style casing and built in cooling fan, effectively increase heat dissipation during operation, improving power output.
●Longer battery mounting plate with integrated ESC mount. Not only is the battery mount more rigid, the battery can be shifted based on its dimension for better CG. In addition, the screw count has been reduced to minimize assembly and maintenance time.
●High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
●Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
●Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
●New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.
 
- Specification(3GX Programmable Flybarless System) :
●Operating Temperature:-10~60 degree
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Size:36.5x25.2x15.6 mm Size
●Weight11g Weight
●Supports Wide/Narrow Bandwidth Digital and brushless servos
●Spektrum and JR Satellite antennas support (Replaces original factory receiver)
●Futaba S.BUS system support
●Built in governor function
●Maximum working voltage:8.5V
●Compatible with 1024/2048 resolution Spektrum receivers
●Supports 90/120/135/140 CCPM swashplates
●Field setup without the use of a PC
●Compatible with 2 to 5 blades rotor heads
●Support up to 6 servos
●Automatic servo type recognization
 
- Specifications(T-Rex450Pro V2) 
●Length: 635mm
●Height: 230mm
●Main Rotor Diameter: 710mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 15T
●Main Drive Gear: 150T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10:4.24
●Weight(w/o power system): 530g
●Flying Weight: Approx. 640g
●Color carton:27.3x10x6.6cm
<권장 사양>
- 조종기 : 6Ch 이상 헬기 조종기(Hitec Aurora9 또는 Spektrum DX6/7/8 이상 권장)
- CCPM서보 : 제품에 포함되어 있습니다.
- 수신기 : 6ch 이상 수신기
- BL 변속기 : 제품에 포함되어 있습니다.
- BL 모터 : 제품에 포함되어 있습니다.
- 자이로 : 제품에 포함되어 있습니다.
- 배터리 : PT-B2200N-Evo30/Evo35/Evo40/SP35/SP45 3S(추천)
- Regulator : U-BEC 3A 또는 D-BEC 3A(권장사양)
 
<제품 특징>
- 기존 헤드 시스템과 완전히 차별화 되는 New Pro Head System
- 시스템 컴포넌트로 제공되는 Cyclic Servo Housing Set.
- 서보 정비시 Module 단위로 간편해 졌습니다.
- 더욱 더 대형화된 Pro Canopy
- New Main Shaft System.
  Lock Ringless 방식으로 정비가 더욱 간편해 졌습니다.
- New Design Washout Base 및 Radius Arm System.
- New Designed Swash Servo.
- New Torque Tube System
  이제는 450급도 Torque Type!. 보다 정교한 Tail Control 성능을 구현, 아울러 테일의 부하를 줄이기 위해 새롭게 디자인 된 Weighted Tail Rotor Grip.
- New 325mm Carbon Main Rotor 탑재.
- Embedded Tail Servo System.(Tail Servo 파손 걱정 끝! )
   Tail Servo가 Frame 아래에 들어가는 방식으로 설계, 추락시 메인로터의 임팩트로 인해 테일 서보가 파손되는 문제는 해결 하였습니다.
- 일체형 Landing Skid
- 원피스 방식의 메인 프레임
   투피스 방식 보다 추락 시 프레임 파손율이 현저하게 줄었습니다.
- 보다 강화된 배터리 마운트, 역시 프레임 일체형으로 역시 배터리 파손율을 현저하게 줄였습니다.
- T-Rex700 Stylish 수평/수직 핀 세트.
　
<제품 이미지>