Castle Creation PHOENIX EDGE 160HV

Brushless ESC

변속기 제조사의 명가 미국 Castle Creation사의 최신 EDGE Series!

Phoenix EDGE 160HV(High Voltage) 변속기는 피지컬 거버너를 내장, 별도의 센서 포트를 통해 수신기의 보조채널(AUX.1)에서 변속기 거버너 감도 및 종단 RPM, Overload 감지 레벨 등등 다양한 변속기 제어 기능이 포함되어 있습니다.

700/800급 전동 헬기 및 90~120급 전동 비행기용.

주의 : HV 방식의 변속기는 모두 OPTO 구성이므로 별도의 U-BEC 또는 수신기 배터리가 소요됩니다.

Introductions ;

● The new Castle Edge ESC provide New Phoenix Controller AUX Line within more options as below:
a. Gain input - Allow the ESC to utilize an additional receiver channel to adjust the governor gain.
b. RPM out- Toggles the AUX Line for every electrical commutation. Divide this number by your number of magnetic pole pairs for mechanical RPM.
c. Excessive load detection - Prevent damage caused by large current spikes typically caused by too much load or possibly a short in the motor wires.
d. Audible Beacon - The controller will emit an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is only emitted if the motor is not running
e. Log Data Reset Percentage - The users may select a percentage of the data buffer which all data is erased upon ESC boot up.
This helps to ensure that the most recent flight is logged.
● Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
● Opto isolated throttle cable helps reduce radio interference.
● Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight.
 

Specification:

●Surge current:120Amps
●Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
●Max Supporting input voltage:50V(12s Li-Po/36 cells Nicad/NiMH)
●Size:86.6X50.6X23.2mm
●Weight:148g
●Please download the lastest version for your Castle Link
NOTE: Not including BEC. User need to provide the power for receiver and servo.

<제품 이미지>